Can-Am outlander 400 series Operator'S Manual Download Page 22

Page: 22 / 156

2-UP Models Only



WARNING

V00A2DQ

POTENTIAL HAZARD

Allowing passenger to sit in a location other than the designated passen-
ger's seat.

WHAT CAN HAPPEN

Passenger seated in a location other than the designated passenger's seat
could:

– impair vehicle stability which could lead to a loss of control
– suffer injury from impact on hard surfaces.

Could cause an accident, resulting in harm to you and/or your passenger.

HOW TO AVOID THE HAZARD

Passenger must always remain seated on designated passenger's seat with
feet firmly planted on footrests and always hold on to the grab handles.

___________

SAFETY INFORMATION

___________

Summary of Contents for outlander 400 series





























































































































































Search results

Summary of Contents for outlander 400 series

Reviews:

Related manuals for outlander 400 series

Brands by name

Popular brands

Can-Am outlander 400 series, Operator'S Manual

Search results

Summary of Contents for outlander 400 series

Reviews:

Related manuals for outlander 400 series

Brands by name

Popular brands