Can-Am outlander 400 series Operator'S Manual Download Page 43

Page: 43 / 156



WARNING

V00A0OQ

POTENTIAL HAZARD

Operating this vehicle with improper tires, or with improper or uneven tire
pressure.

WHAT CAN HAPPEN

Use of improper tires on this vehicle, or operation of this vehicle with im-
proper or uneven tire pressure, may cause loss of control, tire blow outs,
tire to move around on its rim, and increases the risk of an accident.

HOW TO AVOID THE HAZARD

Always use the size and type of tires specified further in this Operator's
Guide for this vehicle.

Always maintain proper tire pressure as described further in this Opera-
tor's Guide.

Always replace wheels or tires that are damaged.

____________

SAFETY INFORMATION

___________

Summary of Contents for outlander 400 series





























































































































































Search results

Summary of Contents for outlander 400 series

Reviews:

Related manuals for outlander 400 series

Brands by name

Popular brands

Can-Am outlander 400 series, Operator'S Manual

Search results

Summary of Contents for outlander 400 series

Reviews:

Related manuals for outlander 400 series

Brands by name

Popular brands