Can-Am outlander 400 series Operator'S Manual Download Page 9 | Manualshive

Page: 9 / 156

background image

NOTICE

This Operator's Guide has been pre-
pared to acquaint the owner/operator
of a new vehicle with the various ve-
hicle controls, maintenance and safe
operating instructions. It is indispens-
able for the proper use of the product.

This Operator's Guide uses the follow-
ing symbols.



WARNING

Indicates a potential hazard that, if
not avoided, could result in serious
injury or death.

CAUTION: Denotes an instruction
which, if not followed, could se-
verely

damage

vehicle

compo-

nents.

NOTE:

Indicates supplementary infor-

mation needed to fully complete an in-
struction.

Although the mere reading of such in-
formation does not eliminate the haz-
ard, the understanding and application
of the information will promote the
correct use of this vehicle.

To fully appreciate the pleasures, en-
joyment and excitement of using this
vehicle, there are some basic rules
that MUST be observed and followed
by any user.

European Community

This warning applies only in the Euro-
pean Countries where on road usage
is allowed.



WARNING

On road use:

• This vehicle is built for OFF-

ROAD purposes only. It may
be used for short distances
on paved surfaces at reduced
speed, in order to move the
vehicle from an off-road loca-
tion to another.

• When driving this vehicle on

roads, always refrain from
speeding and substantially
reduce vehicle speed when
turning.

• Failure to do so can cause a

loss of vehicle control, possi-
bly resulting in serious injury.

Front winch:

• The front winch hook of the

so equipped vehicle must be
removed and stored when
riding the vehicle on public
trails and/or roads.

• Failure to

do so can

in-

crease the risk of injury to
bystanders.

______________________

7

«
...
7
8
9
10
11
...
»

Summary of Contents for outlander 400 series





























































































































































Reviews:

No comments

Related manuals for outlander 400 series

Beast 1000 Series

Brand: BMS Pages: 114

Brand: TOMCAR Pages: 22

Brand: Polaris Pages: 109

Brand: PRONAR Pages: 135

RANGER Diesel 2013

Brand: Polaris Pages: 97

Brand: Polaris Pages: 141

Viper 40E (RXL-40E)

Brand: E-TON Pages: 24

SmarTrax John Deere 8770

Brand: Raven Pages: 48

Brand: ODES UTVS Pages: 41

Brand: GAS GAS Pages: 60

Brand: Taylor-Dunn Pages: 232

crazy cart shift

Brand: Razor Pages: 30

Brand: Hammerhead Pages: 70

Brand: Hammerhead Off-Road Pages: 75

Brand: SAFARI Pages: 50

Brand: Access Motor Pages: 65

Ditch Witch PR482

Brand: Charles Machine Works Pages: 6

Brand: SSR Pages: 16

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands