Can-Am outlander 400 series Operator'S Manual Download Page 134

Page: 134 / 156



WARNING

Connect RED (+) cable first then
BLACK (-) cable. Always connect
RED (+) cable first.

Fuses



WARNING

Always turn the ignition switch to
OFF position before replacing a de-
fective fuse.

If a fuse is damaged, replace it by one
of the same rating.

CAUTION: Do not use a higher rat-
ed fuse as this can cause severe
damage.

Fuses are located in the service com-
partment.

V07C0IY

TYPICAL

1. Fuse holders

vmo2006-005-029_a

1. Accessories (15 A) (power outlet and

auxiliary supply)

2. Fan (20 A)
3. Main (30 A)
4. Charging system (20 A)

To remove fuse from holder, remove
the fuse holder cover then pull fuse
out. Check if filament is melted.

A15E0KY

TYPICAL

1. Fuse
2. Check if melted

While reading this Operator’s Guide, remember that:



WARNING

Indicates a potential hazard that, if not avoided, could result in serious in-
jury or death.

132

_____________________

Summary of Contents for outlander 400 series





























































































































































Search results

Summary of Contents for outlander 400 series

Reviews:

Related manuals for outlander 400 series

Brands by name

Popular brands

Can-Am outlander 400 series, Operator'S Manual

Search results

Summary of Contents for outlander 400 series

Reviews:

Related manuals for outlander 400 series

Brands by name

Popular brands