Can-Am outlander 400 series Operator'S Manual Download Page 94

Page: 94 / 156

27) Winch

XT Models

vmo2007-003-016_a

1. Winch
2. Roller fairlead
3. Winch hook



WARNING

The front winch hook of the so
equipped vehicles must be re-
moved and stored when riding
the vehicle on public trails and/or
roads.
Failure to do so can increase the
risk of injury to bystanders.

28) Winch Control Switch

XT Models

Use this switch to roll in or out wire
from winch.

To take out wire rope from winch,
press the left side of switch.

To get wire rope into the winch, press
the right side of switch.

Refer to

BASIC GUIDE TO WINCHING

TECHNIQUES

for more informations.

NOTE:

A winch remote control is al-

so provided with the vehicle to ease
winch operation if necessary, refer to

WINCH REMOTE CONTROL

further in

this section.

vmo2006-005-032_a

1. In
2. Out

29) Roller Fairlead

XT Models

The roller fairlead is used to prevent
damages to the vehicle and guide the
wire rope into the winch.

vmo2007-003-016_a

1. Winch
2. Roller fairlead
3. Winch hook

30) Vehicle Lock

Many models of vehicle lock can be
used.

Please, check with your authorized
Can-Am

ATV

distributor/dealer

know which model you must used
with your vehicle.

______________________

Summary of Contents for outlander 400 series





























































































































































Search results

Summary of Contents for outlander 400 series

Reviews:

Related manuals for outlander 400 series

Brands by name

Popular brands

Can-Am outlander 400 series, Operator'S Manual

Search results

Summary of Contents for outlander 400 series

Reviews:

Related manuals for outlander 400 series

Brands by name

Popular brands