Can-Am outlander 400 series Operator'S Manual Download Page 107

Page: 107 / 156

Transportation

When transporting a vehicle, secure
vehicle to trailer or in pickup box with
suitable tie-downs.

Using ordinary

ropes is not recommended.



WARNING

V00A174

Never tip this vehicle on end for
transporting. We recommend that
you carry the vehicle in its nor-
mal operating position (on all four
wheels).

Place the fuel valve to OFF position.

Select the PARK position and set the
parking brake.

Secure

the

vehicle by the

front

bumper and rear bumper.

CAUTION: Attaching vehicle at oth-
er locations may damage the vehi-
cle.

Unload racks before transporting the
vehicle.

Front Location

vmo2006-016-005_a

TYPICAL

Rear Location

vmo2006-016-006_a

TYPICAL



WARNING

Do not tow this vehicle behind a
car or other vehicle. Use a trailer.

_____________________

105

Summary of Contents for outlander 400 series





























































































































































Search results

Summary of Contents for outlander 400 series

Reviews:

Related manuals for outlander 400 series

Brands by name

Popular brands

Can-Am outlander 400 series, Operator'S Manual

Search results

Summary of Contents for outlander 400 series

Reviews:

Related manuals for outlander 400 series

Brands by name

Popular brands