Can-Am outlander 400 series Operator'S Manual Download Page 33

Page: 33 / 156



WARNING

V00A0QQ

POTENTIAL HAZARD

Operating on excessively steep hills.

WHAT CAN HAPPEN

The vehicle can overturn more easily on extremely steep hills than on level
surfaces or small hills.

HOW TO AVOID THE HAZARD

Never operate this vehicle on hills too steep for the vehicle or for your abil-
ities.

Practice, without and with passenger (2-UP models), on smaller hills before
attempting larger hills.

Always remember that, on 2-UP models, even if this vehicle can climb
some steep hills, it is not recommended to climb such hills with a passen-
ger; always disembark him before attempting this maneuver. Show good
judgement.

____________

SAFETY INFORMATION

___________

Summary of Contents for outlander 400 series





























































































































































Search results

Summary of Contents for outlander 400 series

Reviews:

Related manuals for outlander 400 series

Brands by name

Popular brands

Can-Am outlander 400 series, Operator'S Manual

Search results

Summary of Contents for outlander 400 series

Reviews:

Related manuals for outlander 400 series

Brands by name

Popular brands