Can-Am outlander 400 series Operator'S Manual Download Page 13 | Manualshive

Page: 13 / 156

background image

SPECIAL SAFETY MESSAGES

General

THIS VEHICLE IS NOT A TOY AND
CAN BE HAZARDOUS TO OPERATE.

This vehicle handles differently from
other vehicles including motorcycles
and cars. A collision or rollover can
occur quickly, even during routine ma-
neuvers such as turning and driving on
hills or over obstacles, if you fail to take
proper precautions.

SEVERE INJURY OR DEATH

can re-

sult if you do not follow these instruc-
tions:

Training



Read this Operator's Guide and all
on-product warning labels careful-
ly and follow the operating proce-
dures described. Watch and pay at-
tention to the

SAFETY VIDEO

be-

fore operation.



Never operate this vehicle without
proper instruction.

Take a train-

ing course

. All operators should

receive training from a certified
instructor.

See your authorized

Can-Am ATV distributor/dealer for
more informations.

Performance

2-UP Models



The vehicle handling, stability and
braking distance may be affect-
ed when riding with a passenger.
Safely reduce speed when riding
with a passenger.

Allow greater

distance for braking.

Age



Always follow this age recommen-
dation: A person under 16 years old
should never operate this vehicle.



Passenger on 2-UP models should
be 12 years old or more and must
be capable of keeping his feet on
the footrests and his hands on grab
handles at all times when seated.

Speed



Never operate at excessive speeds.
Always go at a speed that is prop-
er for the terrain, visibility, and op-
erating conditions, and your experi-
ence.

Riding



Never carry a passenger on this
vehicle unless you are operating a
2-UP model.



2-UP Models:

Never carry more

than one (1) passenger on this ve-
hicle.

This passenger should be

12 years old or more and must be
capable of keeping his feet on the
footrests and his hands on grab
handles at all times when seated.



Never operate this vehicle on any
paved surfaces unless it is for short
distances, at reduced speed and in
order to move the vehicle from an
off-road location to another.



Always respect the road traffic laws
when you operate this vehicle on
the roadway, even a dirt or gravel
road.



Never take place on this vehicle
without wearing an approved hel-
met that fits properly. The operator
and the passenger (2-UP models)
should also wear eye protection
(goggles or face shield), gloves,
boots, long sleeved shirt or jacket,
and long pants. The passenger on
2-UP models should have an ap-
proved helmet including a rigid chin
guard.

____________

SAFETY INFORMATION

___________

11

«
...
11
12
13
14
15
...
»

Summary of Contents for outlander 400 series





























































































































































Reviews:

No comments

Related manuals for outlander 400 series

Brand: Yerf-Dog Pages: 21

1970 SKI-DADDLER

Brand: AMF Pages: 74

Brand: Yamaha Pages: 52

Brand: Yamaha Pages: 88

Brand: Yamaha Pages: 100

Brand: Yamaha Pages: 88

Brand: Yamaha Pages: 83

Brand: Yamaha Pages: 94

Brand: Yamaha Pages: 94

Brand: Yamaha Pages: 96

Brand: Yamaha Pages: 94

Brand: Yamaha Pages: 100

Brand: Yamaha Pages: 98

Brand: Yamaha Pages: 106

Brand: Yamaha Pages: 115

Brand: Yamaha Pages: 100

Brand: Yamaha Pages: 102

Brand: Yamaha Pages: 94

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands