Can-Am outlander 400 series Operator'S Manual Download Page 45

Page: 45 / 156



WARNING

V00A0PQ

POTENTIAL HAZARD

Overloading this vehicle or carrying or towing cargo improperly.

WHAT CAN HAPPEN

Could cause changes in vehicle handling which could lead to an accident.

HOW TO AVOID THE HAZARD

Never exceed the stated load capacity for this vehicle including operator
and passenger (2-UP models), as well as other loads and added acces-
sories.

Cargo should be properly distributed and securely attached.

Reduce speed when carrying cargo or pulling a trailer. Allow greater dis-
tance for braking.

Always follow the instructions in this Operator's Guide for carrying cargo
or pulling a trailer.

____________

SAFETY INFORMATION

___________

Summary of Contents for outlander 400 series





























































































































































Search results

Summary of Contents for outlander 400 series

Reviews:

Related manuals for outlander 400 series

Brands by name

Popular brands

Can-Am outlander 400 series, Operator'S Manual

Search results

Summary of Contents for outlander 400 series

Reviews:

Related manuals for outlander 400 series

Brands by name

Popular brands