Cambium Networks PTP 820C, User Manual

Page: 242 / 672

Chapter 7: Quality of Service (QoS) Configuring Policers (Rate Metering)
phn-3963_004v000
Page 7-49
Assigning Unicast Policers
To assign a policer for unicast traffic to a logical interface:
1.
Select Ethernet > Interfaces > Logical Interfaces. The Logical Interfaces page opens ( Figure
140 ).
2. Select the interface in the Ethernet Logical Port Configuration Table and click Policers. The
Policers page opens. By default, the Policers page opens to the Unicast Policer table (
Figure
152 ).
3. In the Policer profile field, select a profile from the policer profiles defined in the system. The
Policer profile drop-down list includes the ID and description of all defined profiles.
4. In the Unicast admin field, select Enable to enable policing on unicast traffic flows from the
logical interface, or Disable to disable policing on unicast traffic flows from the logical
interface.
5. Click Apply.
Assigning Multicast Policers
To assign a policer for multicast traffic to a logical interface:
1. Select Ethernet > Interfaces > Logical Interfaces. The Logical Interfaces page opens ( Figure
140 ).
2. Select the interface in the Ethernet Logical Port Configuration table and click Policers. The
Policers page opens. By default, the Policers page opens to the Unicast Policer table (
Figure
152 ).
3. Select Multicast Policer. The Multicast Policer table appears.
Figure 153 Logical Interfaces – Policers Page – Multicast Policer