Cambium Networks PTP 820C, User Manual

Page: 259 / 672

Chapter 7: Quality of Service (QoS) Configuring Egress Shaping
phn-3963_004v000
Page 7-66
To assign a different queue shaper profile to a queue:
1. Select Ethernet > Interfaces > Logical Interfaces. The Logical Interfaces page opens ( Figure
140 ).
2. Select an interface in the Ethernet Logical Port Configuration table and click Shaper. The
Logical Interfaces – Shaper page opens, with the Egress Queue Shaper Configuration table
open by default (
Figure 168 ).
3. Select an interface in the Ethernet Logical Port Configuration table and click Shaper. The
Logical Interfaces – Shaper page opens, with the Egress Queue Shaper Configuration table
open by default (
Figure 168 ).
4. Select the row you want to edit and click Edit. The Egress Queue Shaper Configuration – Edit
page opens. This page is similar to the Egress Queue Shaper Configuration – Add page (
Figure
169 ).
5. To assign a different egress queue shaper profile, select the profile in the Profile ID field.
6. To enable or disable egress queue shaping for the selected queue, select Enable to enable
egress queue shaping for the queue, or Disable to disable egress queue shaping for the queue.
7. Click Apply, then Close.
Assigning a Service Bundle Shaper Profile to a Service Bundle
To assign a service bundle shaper profile to a service bundle:
1.
Select Ethernet > Interfaces > Logical Interfaces. The Logical Interfaces page opens ( Figure
140 ).
2. Select an interface in the Ethernet Logical Port Configuration table and click Shaper. The
Logical Interfaces – Shaper page opens, with the Egress Queue Shaper Configuration table
open by default (
Figure 168 ).
3. Select Egress Service Bundle Shaper. The Egress Service Bundle Shaper Configuration table
appears. All service bundle shaper profiles defined in the system are listed in the table.