Chapter 19: Ethernet Protocols (CLI)
Configuring Adaptive Bandwidth Notification (ABN)
(CLI)
phn-3963_004v000
Page 19-378
root> ethernet abn abn-entity-create abn-name <abn-name> monitored-group
<monitored-group> control-interface <control-interface> control-slot
<control-slot> control-port <control-port> vlan <vlan>
To create an ABN entity consisting of an interface group as the monitored interface and an
interface group as the control interface, enter the following command in root view:
root> ethernet abn abn-entity-create abn-name <abn-name> monitored-group
<monitored-group> control-group <control-group> vlan <vlan>
To set the Admin status of an ABN entity, enter the following command in root view:
root> ethernet abn abn-admin-set abn-name <abn-name> admin <admin-state>
To delete an ABN entity, enter the following command in root view:
root> ethernet abn abn-entity-delete abn-name <abn-name>
To show a summary of all ABN entities defined, enter the following command in root view:
root> ethernet abn abn-entities-summary-show
To show a summary of the configuration and status of a specific ABN entity, enter the following
command in root view:
root> ethernet abn abn-entity-show abn-name <abn-name>
To set the monitoring interval for which a weighted average of the bandwidth readings is
calculated, enter the following command in root view:
root> ethernet abn abn-monitoring-interval-set abn-name <abn-name> period
<monitoring-interval>
To set how often messages are transmitted when bandwidth is below the nominal value, enter the
following command in root view:
root> ethernet abn abn-period-set abn-name <abn-name> period <message-
frequency>
To set the holdoff time, enter the following command in root view. Holdoff time is the amount of
time the system waits when bandwidth degradation occurs, before transmitting a message. If the
bandwidth is below the nominal value when the holdoff period ends, the system starts
transmitting messages:
root> ethernet abn abn-holdoff-set abn-name <abn-name> holdoff <holdoff-
time>
To clear the messages counter, enter the following command in root view:
root> ethernet abn abn-entity-counter-reset abn-name <abn-name>
Table 187 ABN Entity CLI Parameters
Parameter
Input Type
Permitted Values
Description
pipe-id
Number
1
The pipe ID. Only one pipe is
supported in the current release.
abn-name
Text String
The name of the ABN entity.
monitored-
interface
Variable
radio
This parameter is always set to
radio.
