Chapter 10: Access Management and Security
Configuring RADIUS
phn-3963_004v000
Page 10-132
corresponding to the access channels you wish to permit, where the value for each access
channel is:
none=0
serial=1
telnet=2
ssh=4
web=8
nms=16
snmp=32
snmpV3=64
Thus for example, enter 127 to allow access from all channels:
SSH + Web + NMS + SNMP +SNMPv3;
Or enter 24 to allow access only from NMS + SNMP channels.
iii Click OK.
23 Click OK.
The following figure shows the Attributes table for the Radius_Advanced group,
where access to the device is allowed from all channels.
Figure 225 Create Network Policy – Example of Vendor-Specific Attribute Configuration
24 Close all opened windows and click Next.
25 In the Completing New Network Policy window, click Finish.
