Cambium Networks PTP 820C, User Manual

Page: 110 / 672

Chapter 3: Configuration Guide Configuring HSB Radio Protection
phn-3963_004v000
Page 3-32
Figure 58 Standby Tab of Radio Parameters Page
Editing Standby Unit Settings
Almost all settings of the standby unit are view-only. However, several settings are editable on the
Standby unit. They must be configured separately for the Standby unit, and are not copied via
copy-to-mate, nor do they trigger a configuration mismatch in the CLI.
In the Web EMS, failure to synchronize these configuration settings causes a configuration
mismatch alarm.
The following settings must be configured separately on the standby unit:

Setting the Unit Name – in the Name field of the Unit Parameters page (see Configuring Unit
Parameters ).
 Disabling/enabling Radio TX-mute – in the TX mute field of the Edit Radio Parameters window.
Refer to
Configuring the Radio Parameters .

Clearing the Radio and RMON counters – in the TX mute field of the Counters Page . Refer
to Displaying and Clearing Defective Block Counters .

Setting the activation key configuration – in the Activation Key and Demo admin fields of
the
Figure 11 Activation Key Overview Page (see Configuring the Activation Key ).

Defining user accounts – Refer to the Access Control User Accounts Page (see Configuring
Users).

Setting synchronization settings – Refer to the SyncE Regenerator page (see Configuring the
Sync Regenerator ).
Viewing Link and Protection Status and Activity
You can view link and protection status and activity any time.
To view link and protection status and activity:
1. Select Platform > Management > Unit Redundancy. The Unit Redundancy (HSB Protection)
page opens.