Chapter 13: Getting Started (CLI)
Configuring the Radio Parameters (CLI)
phn-3963_004v000
Page 13-191
To display the mute status of a radio, enter the following command:
radio[x/x]>rf mute show status
Table 67 Radio Mute/Unmute CLI Parameters
Parameter
Input Type
Permitted Values
Description
admin
Variable
on
off
Mutes (on) or unmutes
(off) the radio.
Examples
The following command mutes radio carrier 1:
radio[2/1]>rf mute set admin on
The following command unmutes radio carrier 2 in a PTP 820C unit:
radio[2/2]>rf mute set admin off
Configuring the Transmit (TX) Level (CLI)
To set the transmit (TX) level of a radio, enter the following command:
radio[x/x]>rf set tx-level <tx-level>
To display the maximum transmit (TX) level of a radio, enter the following command:
radio[x/x]>rf show max-tx-level
Table 68 Radio Transmit (TX) Level CLI Parameters
Parameter
Input Type
Permitted Values
Description
tx-level
Number
PTP 820C and PTP 820S units: -
1 to 22
The desired TX signal
level (TSL), in dBm.
Examples
The following command sets the TX level of radio carrier 1 to 10 dBm:
radio[2/1]>rf set tx-level 10
Configuring the Transmit (TX) Frequency (CLI)
To set the transmit (TX) frequency of a radio, enter the following command. This command
includes an option to set the remote RX frequency in parallel:
radio[x/x]>rf set tx-frequency <tx-frequency> local-remote <local-remote>
