Cambium Networks cnPilot R200, User Manual

Page: 69 / 151

Chapter 3: Advanced Configuration Wireless
Page
67
Radio on/off Select “Radio off” to disable wireless.
Select “Radio on” to enable wireless.
Wireless connection
mode According to the wireless client type, select one of the modes. Modes
are AP/ Repeater. Default is AP.
Network Mode Choose one network mode from the drop-down list. For 5GHz radio
the default is 11vht AC/AN/A. Default is 11b/g/n mixed mode.
SSID
It is the basic identity of wireless LAN. SSID can be any alphanumeric
or a combination of special characters. It will appear in the wireless
network access list.
Multiple SSID1~SSID3 cnPilot r190V/r190W/R200/R200P Routers support 4 SSIDs on each
radio.
Hidden
After the item is checked, the SSID is no longer displayed in the
search for the Wi-Fi wireless network connection list
Broadcast(SSID)
After initial State opening, the device broadcasts the SSID of the
router to wireless network
AP Isolation
If AP isolation is enabled, the clients of the AP cannot access each
other.
MBSSID AP Isolation AP isolation among the devices which does not belong to this AP.
When the option is enabled, the devices which do not belong to this
AP cannot access the devices which are within the AP.
BSSID MAC address of the AP.
Frequency (Channel) You can select Auto Select.
HT Physical Mode
Operating
Mode 1. Mixed Mode: In this mode, the previous wireless card can
recognize and connect to the Pre-N AP, but the throughput will be
affected
2. Green Field: high throughput can be achieved, but it will affect
backward compatibility, and security of the system
Channel Bandwidth Select channel bandwidth, default is 20 MHz and 20/40 MHz. Default
is 20/40
Guard Interval Select long/short. default is short.