Cambium Networks cnPilot R200, User Manual

Page: 39 / 151

Chapter 3: Advanced Configuration Network
Page
37
Network
You can configure the WAN port, LAN port, DDNS, Multi WAN, DMZ, MAC Clone, Port Forward
and other parameters in this section of the web management interface.
WAN
This page allows you to set WAN configuration with different modes. Use the Connection Type
drop down list to choose one WAN mode and then the corresponding page will be displayed.
Note
1. By default, Management access over WAN is disabled for security
concerns and can be enabled if required. For more details, please
refer
Enabling Mangement access for wireless clients
2. By default, SNMP access over WAN interface is disabled for
security concerns and can be enabled if required. For more details,
please refer
Enabling SNMP access over WAN
WAN Settings
Table 11 Connect name
Content Define Comment
No
1
～
99
WAN Connection identifier
Service TR069
The connection supports management applications i.e.
R069, WEB, SNMP and Provision
INTERNET The connection solely supports internet service
TR069_INTERNET
The connection supports management and internet
applications
VOICE
The connection supports voice applications, like SIP
and RTP
TR069_VOICE
The connection supports both management and voice
applications
VOICE_INTERNET The connection supports voice and internet
applications
TR069_VOICE_INTERNET The connection supports management, voice and
internet applications
Other The connection support STB (Set Top Box).
NAT
Mode B Bridge
R Router