Cambium Networks cnPilot R200, User Manual

Page: 19 / 151

Chapter 2: Basic Settings Hardware Installation
Page
17
Figure 1 Login Prompt – LAN Port
For administrator mode operation, please type admin/admin on Username/Password and click
Login to begin configuration. For user mode operation, please type user/user on
Username/Password and click Login to begin configuration.
Note
If you are unable to access the web configuration, please see
Chapter 4:
Troubleshooting Guide for more information.
The web management interface automatically logs out the user after 5 minutes of inactivity.
Logging in from the WAN port
Note
By default, the web access from WAN interface is disabled from 4.3.3 release
onwards for security reasons.
Ensure your PC is connected to the router’s WAN port correctly.
Obtain the IP addresses of WAN port using Voice prompt or by logging into the device web
management interface via a LAN port and navigating to Status page.
Open a web browser on your PC and type http://<IP address of WAN port>. The following login
page will be opened to enter username and password.
Figure 2 Login Prompt – WAN Port
For administrator mode operation, type
admin/admin on Username/Password and click Login to
begin configuration. For user mode operation, type user/user on Username/Password and click
Login to begin configuration.