Calrec SUMMA, User Manual

Page: 114 / 198

METER DISPLAY LAYOUT WITH CUSTOMISATION
Summa upstand meters are now arranged and displayed in two halves. The lower half displays the meters for the
access fader paths in a fixed layout each corresponding to the fader below. The upper half of each meter panel is
arranged into 2 rows of 24 meter slots which are fully customisable.
This allows for Mains, Groups, Auxs, Tracks, Console LS, PFL, AFL, APFL, Off Air Conference, Autominus and
External Input metering to be mapped out. Summa 12+8, 24+8 and 36+8 have one, two and three meter panels
respectively. Figure 1 shows the empty layout for the first 12 faders.
FIGURE 1 -
METER LAYOUT FOR FADERS 1-12
Customising Meter Layouts
Figure 2. shows the meter layout screen for the first 12 fader panel and part of the second. The lower section shows
the usage of the 2 rows of 24 meter slots shown here empty. The upper section is used to create the meter from
source and options required which varies depending on the type. The minimum slot usage is 1 slot for Auxs, Tracks,
Off-air & Mix minus sources or 2 slots for Mains, Groups, Console LS, AFL, PFL, APFL, User Meters and External
Inputs. Depending on the options selected for that source this can expand the custom meter up to 10 slots. The
primary option available for all meters is to provide full height meters which doubles the slot usage vertically. The
rest of the options vary in the number of meter slots used depending on meter source type.
FIGURE 2 -
METER LAYOUT SCREEN EMPTY
114 SUMMA
Networked Audio Production System
METERING