Cadillac User Experience (GMNA-Localizing-U.S./Canada-11434397) - 2018 -
crc - 5/2/17
REAR SEAT INFOTAINMENT
51
To reset the system to the factory
default settings:
1. Press SETUP on the remote
control.
2. Use the left/right and down
navigation arrows on the remote
control to select the Default
sub-menu under the Preference
Page and press ENTER to reset
the settings. The Parental Setting
will not be affected.
Vehicle Speakers
Audio from the DVD player or an
auxiliary device can be heard through
the vehicle speakers or the wireless/
wired headphones, while the radio is
tuned to one of the frequencies
selected on the Sound Around portion
of the system
’
s remote control. See
“
Remote Controls
”
later in this section.
Only one audio source can be heard
through the vehicle
’
s speakers at a
time. The audio source being used is
specified by the A/V (audio/video)
source selected on the driver side
headrest video display screen.
To turn the RSI system audio output
to the vehicle
’
s speakers, press SOUND
AROUND ON/OFF, on the remote
control. The audio from the RSI
system can be heard through the
wireless/wired headphones and the
vehicle
’
s speakers at the same time.
Radio volume can vary when
switching between the radio, CD, DVD,
MP3, or an auxiliary device.
100 Channel FM-Modulation
Control
For Monitor
“
3
”
Only:
To activate the FM modulation
feature, press SOUND AROUND ON/
OFF on the remote control until
“
FM
CH XX.XMH2
”
is displayed on the
monitor.
Press SOUND AROUND SELECTon the
remote control to cycle through a
pre-established list of six channels
(88.3MHz, 88.7MHz, 89.1MHz,
89.5MHz, 89.9MHz, and 90.3MHz).
If none of these stations are suitable
for FM modulation, use the Fine Tune
option. To Fine Tune the modulator to
a specific target station while the
display is active, press the up or down
navigation arrows on the remote
control to change the channel by
0.2MHz. Hold down the up or down
navigation arrows to cycle quickly
through the stations. When the end
(107.9MHz) or beginning (87.5MHz) of
the FM band is reached, the channels
will continue from the beginning
(87.5MHz) or end (107.9MHz),
respectively.
To deactivate the FM modulation
feature, press SOUND AROUND ON/
OFF on the remote control until FM
OFF is displayed on the monitor.
Caution
Do not store the headphones in
heat or direct sunlight. This could
damage the headphones and repairs
would not be covered by the vehicle
warranty. Storage in extreme cold
can weaken the batteries. Keep the
headphones stored in a cool, dry
place.
