
Cadillac User Experience (GMNA-Localizing-U.S./Canada-11434397) - 2018 -
crc - 5/2/17
48
REAR SEAT INFOTAINMENT
‐
MPE
‐
MPEG-1
‐
MPEG-2
‐
MPG
‐
OGG
‐
WMA
12. SOURCE
.
Press to select between
Monitor 3, Monitor 4, or the
AV INPUT. Each video display
screen can be adjusted
independently, and can
display information from
both DVD players and both
A/V inputs.
13. POWER
O
.
Press to turn the power on or
off. Each video screen can be
powered on or off
independently.
Infrared Remote Sensor :
This is at
the top center of the video display
screen. Do not block the signal from
the remote to the sensor.
Infrared Transmitters :
These are at
the top center of the video display
screen. Do not block the signal from
the headphones to the transmitters.
Using the RSI On-Screen Display
(OSD) Menus
Use the OSD setup display menus for:
.
General Setup
.
Audio Setup
.
Video Setup
.
Preference Setup
To use the OSD menus while using
the DVD player or an auxiliary device:
1. Press SETUP on the remote
control to display the icons and
pages on the menu.
2. Select the desired page by using
the left/right navigation arrows
to move the cursor.
3. Press SETUP again to cancel use
of the setup display.
Not all DVDs support all of the feature
defaults in the setup menus. If a
feature is not supported, the defaults
are provided by the DVD media.
General Setup Menu
To set the language for the OSD:
1. Press SETUP on the remote
control.
2. Use the left/right navigation
arrows to navigate the General
Setup Page, then use the down
navigation arrow to select the
OSD language.
3. Press ENTER and then use the
right or left navigation arrows to
select English, Simple/Traditional
Chinese, French, German, Italian,
Spanish, Portuguese, or Korean.
Press the left navigation arrow to
go back to the previous menu.
The angle mark allows different
viewing angles on the DVD player. To
set the angle mark:
1. Press SETUP on the remote
control.
2. Use the left/right navigation
arrows to navigate the General
Setup Page, then use the down
navigation arrow to select
Angle Mark.