Cadillac STS-V 2008, Manual

Page: 131 / 162

Transportation
•
Navigation Airport
•
Navigation Bus Station
•
Navigation Campground
•
Navigation Ferry Terminal
•
Navigation Hotel
•
Navigation Rental Car Agency
•
Navigation Rest Area
•
Navigation Train Station
Destination Commands
The following are destination commands. Confirm
your choice of destination entry by responding to
the system with “Enter destination” when prompted.
You may also state “Add waypoint” or “To waypoint”
after entering a destination to add a waypoint along
the route to your final destination. You can cancel
the command by stating, “cancel” after the system
talk back.
Navigation [go] home, navigation [select] home:
These commands instruct the system to set the home
preset as the destination.
Navigation [go to] previous destination:
This command instructs the system to set the
previous destination as the new destination.
Navigation [go to] preset destination [number]
(one, two, three, four, or five): These commands
instruct the system to set one of the preset destinations
one through five as the new destination.
Cancel: This command instructs the system to cancel
the most recently given command.
Nametag Commands
You may have up to 10 nametag entries for phone book
entries and 10 nametag entries for destinations.
Navigation store name: This command lets the
system know you will be storing a name in memory.
The system will request that you state the nametag.
After the prompt, state the name desired for this point.
The system will play back the recorded nametag
and will request that you confirm it. After the prompt,
state “Yes” to confirm or “No” to cancel.
4-9