153
Local Management: Overview, Setup, and Navigation
atm_stp_state:
Syntax:
atm_stp_state [STATE]
Description:
The atm_stp_state command allows the user to enable, disable, or
check the status of the Spanning Tree Algorithm on all ATM
interfaces. The user must specify the STATE option as enable,
disable, or status. The STATE field is mandatory.
Options:
enable, disable, status
Example:
cdp:
Syntax:
cdp [enable/disable/status]
Description:
Allows management of Cabletron Discovery Protocol (CDP) on
this module. The user may enable, disable, or see the current status
of CDP.
Options:
Not Applicable
Example
:
The atm_stp_state command is only available if an HSIM-A6DP is installed in
the module. This command allows the user to enable, disable, or check the current
status of the Spanning Tree Algorithm on all ATM interfaces.
NOTE
-> atm_stp_state status
Atm Stp is Enabled
-> atm_stp_state disable
-> atm_stp_state enable
2314_79
-> cdp status
CDP is Enabled
-> cdp disable
-> cdp status
CDP is Disabled
-> cdp enable
-> cdp status
CDP is Enabled
cdp
