145
Local Management: Overview, Setup, and Navigation
Figure 49. Network Tools Help Screen
The Network Tools functions are performed using a series of commands. Entering
commands in Network Tools involves typing the command to be executed at the
Network Tools prompt, adding any desired or required extensions, and pressing
ENTER.
There are two categories of commands in the command set.
•
Built-in Commands – Allow the user to access and manage network devices.
The atm_stp_state command only displays when an HSIM/VHSIM that
supports ATM is installed such as the HSIM-A6DP or VHSIM-A6DP.
•
Special Commands – Allow the user to exit from Network Tools. The
commands are done, exit, and quit.
Welcome to Network Tools
> help
Commands Available to the User :
Built in Commands:
arp defroute netstat ping
reset show switch traceroute
arp_learn atm_stp_state cdp dynamic_egress
lg_frame_admin link_trap loopback_detect soft_reset
stpPort stpStandby telnet vrrpPort
SPECIAL :
done, quit, or exit - Exit from Network Tools.
For help with a specific command, type ’help <command>’.
