113
Local Management: Overview, Setup, and Navigation
GARP Operational Status Screen Fields
The following information briefly explains each GARP Operational Status Screen
field.
Port # (Read-Only)
This field displays the number of the front panel interface.
GMRP (Toggle)
This field sets the port to operate as a GMRP-aware port. The setting is only valid
if the GMRP Protocol field near the bottom of the screen is set to Enable. The
GMRP field setting toggles between Y (yes) and N (no). The default is “Y”.
To set the port, refer to “Setting a Port to Operate in GMRP or GVRP” on page 114.
GVRP (Toggle)
This field sets the port to operate as a GVRP-aware port. The setting is only valid
if the GVRP Protocol field near the bottom of the screen is set to Enable. The
GMRP field setting toggles between Y (yes) and N (no). The default is “Y”.
To set the port, refer to “Setting a Port to Operate in GMRP or GVRP” on page 114.
Set All Ports (Selectable)
This field sets all ports to the same setting by selecting one of the following:
•
GMRP Enable All
– Sets all ports as GMRP-aware ports. All ports are set to Y
under GMRP.
•
GMRP Disable All
– Sets all ports as not GMRP-aware ports. All ports are set
to N under GMRP.
•
GVRP Enable All
– Sets all ports as GVRP-aware ports. All ports are set to Y
under GVRP.
•
GVRP Disable All
– Sets all ports as not GVRP-aware ports. All ports are set
to N under GVRP.
•
Enable All
– Sets all ports to Y for both GMRP and GVRP.
•
Disable All
– Sets all ports to N for both GMRP and GVRP.
To set all ports, refer to “Setting a Port to Operate in GMRP or GVRP” on
page 114.
