67
Local Management: Overview, Setup, and Navigation
Port (Toggle)
When State is:
•
ADD - Displays the ports available to add to the displayed group. Ports
assigned to other trunk groups will not show up in this list because they are not
available to add.
•
REMOVE - Displays a list of ports currently assigned to the active SmartTrunk
group. They are the only ports available for deletion.
UPDATE (Command)
This command refreshes the table currently displayed. After making
modifications, a user must select the SAVE command to save changes.
NEXT/PREVIOUS (Commands)
These commands will be displayed when there are more than 18 ports.
•
To access ports on the device not seen on the primary screen, use the arrow
keys to highlight the NEXT command at the bottom of the screen, then press
the Return key.
•
To view the previous screen of ports, use the arrow keys to highlight the
PREVIOUS command at the bottom of the screen, then press the Return key.
A SmartTrunk port in a disabled state will not allow any traffic to flow until the
appropriate corresponding trunk group is connected. Inadvertently configuring a
user-attached port to a member of a SmartTrunking group will result in a user
losing network connectivity.
NOTE
