37
Local Management: Overview, Setup, and Navigation
System Resources Screen Fields
The following information briefly explains each System Resources Screen field.
Flash Memory Installed/Available (Read-only)
This field displays the size of Flash Memory and indicates how many bytes are
currently available.
DRAM Installed/Available (Read-only)
This field displays the size of dynamic random access memory (DRAM) and
indicates how many bytes are currently available.
NVRAM Installed/Available (Read-only)
This field displays the size of non-volatile random access memory (NVRAM) and
indicates how many bytes are currently available. NVRAM stores user-entered
parameters such as IP addresses, subnet masks, default gateways, SNMP traps,
bridge configurations, and module specific configurations.
Current Switch Utilization (Read-only)
This field displays the percentage of the device switching capacity currently being
used.
Peak Switch Utilization (Read-only)
This field displays the peak percentage of device switching capacity used, since
the last reset.
Reset Peak Switch Utilization (Toggle)
This field resets the Peak Switch Utilization field, and is either of the following:
•
Yes - Reset the Peak Switch field to the current system traffic.
•
No - Do not reset the Peak Switch field to the current system traffic.
Setting the Reset Peak Switch Utilization
To set the Reset Peak Switch Utilization field to YES or NO, proceed as follows:
1. Use the arrow keys to highlight the Reset Peak Switch Utilization field.
2. Press the Space Bar to select YES or NO.
3. Use the arrow keys to highlight the SAVE command at the bottom of the
screen.
4. Press ENTER. The message “SAVED OK” displays and the Reset Peak
Utilization counter resets to zero.
