Cabletron Systems CoreWatch, User Manual

Page: 319 / 495

CoreWatch User’s Manual 319
Chapter 16: Configuring Routing Policies on the SSR
Figure 206. Direct Export Source dialog box
9. Specify the name you wish to assign to the direct export source in the Destination
Name box.
10. Select the interface associated with the direct routes from the Interface
Name/Address drop-down list.
11. Specify whether the SSR restricts the export or associates a metric with the exported
routes by doing one of the following:
– If you do not want the SSR to export any routes from the source, select the Restrict
export from the specified Direct Source option.
– If you want the SSR to associate a metric with the exported routes, select a metric
from the
Route Metric drop-down list. Select Inherited if you want the route to use
the policy’s default metric. Otherwise, select a number from 1 to 16.
12. Click OK .
13. Repeat step 9 through step 12 until you create all the direct export sources you will
want to include in your export policies.
Configuring and Modifying Static Export Sources
A static export source building block specifies a source for exporting static routes into
other protocols.
To define static export source building blocks that can be used for either RIP or OSPF: