Cabletron Systems CoreWatch, User Manual

Page: 329 / 495

CoreWatch User’s Manual 329
Chapter 16: Configuring Routing Policies on the SSR
Configuring and Modifying Aggregate Source Building Blocks
You can define an aggregate source to specify the source’s protocol, restrict the source’s
routes, specify whether the routes are considered contributors, and set the route’s
preference.
To create aggregate source building blocks:
1. Start Configuration Expert if you have not already done so.
2. Open the configuration file you want to modify and then double-click that file’s
Routing Configuration object.
3. Double-click the IP Routing Configuration object.
4. Double-click the IP Unicast Routing object.
5. Double-click the Routing Policy Configuration object.
6. Double-click the Building Blocks object.
7. Double-click the Aggregate Sources object, and then do one of the following:
– If you are creating a new aggregate source, click the Configure New Aggregate
Source object.
– If you are modifying an existing aggregate source, select that source from the list
of aggregate sources Configuration Expert displays.
An Aggregate Source Definition dialog box similar to the following appears:
Figure 212. Aggregate Source Definition dialog box