Cabletron Systems CoreWatch, User Manual

Page: 193 / 495

CoreWatch User’s Manual 193
Chapter 12: Configuring QoS on the SSR
8. Define each flow field as discussed in the following table. You can enter ANY in a
flow field to specify a wildcard (“don’t care”) condition.
9. Click Next . In the panel that appears, specify whether you want to apply the flow to
specific IPX interfaces. Selecting No applies the flow to all IPX interfaces. Selecting Yes
allows you to apply the flow to specific IPX interfaces.
Table 20. IPX flow fields
Field Description
Source Network Enter the IPX source network address. Specify it in the
following format: a1b2c3d4.
Source Net Mask Enter the IPX source network mask. Specify the mask in
hexadecimal digits. If you do not specify a mask value and
instead use the value ANY, the SSR internally sets the mask
to FFFFFFFF.
Source MAC Addr Enter the source node address. Specify it in the following
format: aa:bb:cc:dd:ee:ff.
If you specify ANY, the SSR assumes a wildcard value. All
MAC addresses are then valid.
Source Port Enter a port number from 1 to 65535, or enter ANY to allow
any value.
Destination Network Enter the IPX destination network and node address. Specify
it in the following format: a1b2c3d4.
Destination Net Mask Enter the IPX destination network mask. Specify the mask in
hexadecimal digits or ANY to allow any value.
Destination MAC Addr Enter the destination node address.
The same requirements and restrictions for Source MAC
Addr apply to Destination MAC Addr.
Destination Port Enter a port number from 1 to 65535, or enter ANY to allow
any value.