Cabletron Systems CoreWatch, User Manual

Page: 308 / 495

Chapter 16: Configuring Routing Policies on the SSR
308 CoreWatch User’s Manual
An Aggregate Network panel similar to the following appears:
Figure 200. Aggregate Network panel
14. Specify the aggregate network by entering the appropriate IP address and
subnetwork mask in the Aggregate Network and Network Mask boxes, respectively.
15. Click Finish .
Modifying Aggregate Destinations
You can modify aggregate destinations to change their name, type, route preference, or
path name format.
To create aggregate destination building blocks:
1. Start Configuration Expert if you have not already done so.
2. Open the configuration file you want to modify and then double-click that file’s
Routing Configuration object.
3. Double-click the IP Routing Configuration object.
4. Double-click the IP Unicast Routing object.
5. Double-click the Routing Policy Configuration object.
6. Double-click the Building Blocks object.
7. Double-click the Aggregate Destinations object and select the aggregate destination
you want to modify.