Cabletron Systems CoreWatch, User Manual

Page: 192 / 495

Chapter 12: Configuring QoS on the SSR
192 CoreWatch User’s Manual
An IPX Policy Definition panel similar to the following appears:
Figure 116. IPX Policy Definition panel (IPX flow)
6. Specify the flow’s name in the Name box.
7. From the Flow Priority drop-down list, select the priority you want to assign to the
fields listed in the Flow Definition section of the panel. The following table describes
the priorities you may set:
Table 19. IPX flow priorities
Priority Description
control Assigns control priority to the IPX flow fields you specify. This
is the highest priority.
Note:
Control priority is reserved for system control traffic.
Assign that priority only when necessary. Otherwise,
you may hamper system operations if you assign the
control priority to non-system traffic (such as HTTP,
FTP, and so on).
high Assigns high priority to the IPX flow fields you specify.
medium Assigns medium priority to the IPX flow fields you specify.
low Assigns low priority to the IPX flow fields you specify. This is
the default.