Cabletron Systems CoreWatch, User Manual

Page: 128 / 495

Chapter 8: Configuring IP Interfaces for the SSR
128 CoreWatch User’s Manual
8. Specify a router identification number in the
Virtual Router ID
box. You must specify
a router identification number in order to complete VRRP configuration.
Note:
The identification you enter must consist of digits only. No other characters
are allowed in the identification name.
9. If you wish, under Associate IP Address with Virtual Router , specify the IP address and
subnet mask of the associated router in the appropriate text boxes.
10. Click the Advanced tab:
Figure 72. VRRP Router panel (Advanced tab)
11. If you wish, specify the following options on the Advanced tab of the VRRP Router
panel:
a. Specify values in the Priority and Advertise Interval boxes. You can specify a
number between 1 and 254, inclusive, for the priority, and a number between 1
and 255, inclusive, for the advertise interval.
b. Select an authorization type from the Authorization Type drop-down list.
c. Specify an authorization key in the Authorization Key box. You can specify a key
string up to eight characters in length.
d. Specify whether you want to disable preempt mode by turning the Disable
Preempt Mode option on or off.
e. Specify Start or Stop to activate or deactivate VRRP on the SSR.
12. Click Finish .