12. Exchanging the Gas Cylinder
The following number item references refer to Fig. 2 on Page 6:
•
Before changing the gas bottle, close the cylinder (11), even if the
cylinder
has been completely emptied.
•
Release only the
quick coupling
of the high pressure hose (9) from
the gas
bottle.
Make sure not to twist the high-pressure hose if
possible, to prevent
loosening the connection to the high-pressure
re
gulator
.
•
The quick coupling has a safety mechanism that prevents the releasing
of the
connection when under pressure. If you would want to change
the gas bottle
before completely emptying it, you would first need to
release the pressure
with the manual release valve (4), before
being able to release the gas
cylinder coupling.
•
Connect the new bottle. Open the new gas cylinder slowly and not
abruptly,
to prevent damage to the lines and the pressure re
gulators
.
When handling compressed gas containers, always observe the safety
instructions of your supplier and possibly existing trade association
standards!
9
13. Thermostats and Separating the Temperature Zones
Fig. 6: Guide rail for
plexi divider.
Alternatively, a
fixation with pins
and loops is used.
Your
By the Glass®
Wine Dispenser has two temperature
zones, which can be used variably according to varying ratios of red
and white wines in the climatized
bottle compartments
.
Insert the
plexiglass divider
before placing bottles in the desired positions.
For this, introduce the divider inclined from below in the appropriate guide
rails or loops on the housing ceiling, and, afterwards, place it upright on
the inside bottom floor.
The two temperature zones are controlled via two separate
thermostats
.
The cooler temperature zone (white wine zone) must always be
designated to the side of the
By the Glass®
Wine Dispenser
where the
thermostat displays are located.
For a device that has its own cooling compressor, the outer
thermostat is designated for the white wine zone. For a device with
separate or central cooling, the upper thermostat controls the white wine
zone.
The thermostats and control panels for both zones look
the same from the
outside.
However, the displays differ in a way that the operation of the
compressor and defrosting function are only found on the thermostat for
the cooler zone. Also, the
light
is only switched via the control panel on the
thermostat for the white wine zone.
Fig. 7:
Arrangement of
thermostats for
devices with
connected and
with separate
refrigeration.
