6
1.
Display of the input pressure
2.
Transition pressure display
3.
Display of the discharge pressure
4.
Manual release valve
5.
Set screw for the transition pressure
(Allen screw under cover)
6.
Closing lever
7.
Screw for the discharge pressure with locknut
8.
High-pressure hose I (connected to high-pressure re
gulator
)
9.
High-pressure hose II (quick coupling for gas bottle)
10.
Low-pressure line to the dispensing system
11.
Shut-off valve of gas cylinder
12.
Gas
cylinder
10.
Press the power switch on the side or back of the unit. It lights up
green when switched on.
After this, turn on the device by pressing the thermostat power
buttons
(
) on the front side. The compressor and the fans
start to cool the temperature zones.
Turn on the
light
on the thermostat for the white wine zone (see
Fig. in Para. 1
3
). There is a
dimmer
above the power switch, which
allows you to regulate the light.
9. Commissioning
SETTING-UP AND OPERATION
6
3
7
Connecting the Gas Supply
To operate the system, you need a
pressure regulator
to reduce the inlet pressure of
the gas cylinder, which can be, depending on the filling pressure and degree of
filling, up to 250 bar. The pressure has to be reduced to the desired, stable operation
pressure of 0.25 to max. 0.4 bar. The By the Glass® Wine dispenser Standard comes
with a high-quality pressure re
gulator
.
The following information relates to the model supplied at the time of publication of this
manual for the use with refillable gas cylinders (as of 9/2016). It is a connected
combination of a
high-pressure regulator and a precision pressure regulator
on a
mounting plate. For different models, please note the separate instructions of the
manufacturer.
10
12
9
11
H
igh pressure regulator
Precision
pressure
regulator
Fig. 1: Power switch and
dimmer (in this case top
right but position
depends on model)
The following procedure steps are usually performed
by an installer when installing your By the Glass®
Wine Dispenser.
Only in exceptional cases the necessity will arise for
the user to perform work or adjustments on the
pressure regulators (see also Para. 12).
Fig. 2: Combination of high pressure and precision pressure regulator
2
1
4
8
5
