Burstner Goldie, Manual

Page: 24 / 232

24
I-Modell - 07/07 - Ausgabe 03/07 - 1512317 - BUE-0056-00EN
Before the journey
3
3.3.8 Removable motorcycle rack (special equipment)
The motorcycle rack (Fig. 3) permits transport of a motorcycle or a motor
scooter weighing up to 130 kg.
Scope of delivery The following parts belong to the scope of delivery:
Rack trough (Fig. 3,2) and retaining clip (Fig. 3,1) with quick closure
(Fig. 4,1)
Reverse light and fog tail light (Fig. 3,3)
13-pole Jäger System plug
Ramp (Fig. 5,2)
1 tension belt set (Fig. 5,1)
Entry in the vehicle
documents
Have your Bürstner dealer install the equipment. Your dealer will also take
care of all the formalities for you.
Do not exceed the rear axle load.
Heavy loads behind the rear axle can reduce the load on the front axle
due to the leverage effect ( ). This applies especially to long rear
extensions, if a motorbike is transported on the rear carrier or if there is
a heavy load in the rear storage space. The release of the front axle neg-
atively affects the driving quality, especially for front-driven vehicles.
The motorcycle rack and caravan coupling may not be used simultane-
ously.
An entry must be made in the vehicle documents in order to attach a motor-
cycle rack. The required documents are enclosed with the motorcycle rack.
Also read the manufacturer's instruction manual.
Fig. 3 Motorcycle rack
Fig. 4 Quick closure Fig. 5 Motorcycle rack with ramp