Burstner Goldie Manual Download Page 155

Page: 155 / 232

155

I-Modell - 07/07 - Ausgabe 03/07 - 1512317 - BUE-0056-00EN

Sanitary fittings

Place the Thetford cassette upright.

Turn the drainage neck upwards.

Remove the cap of the drainage neck.

Fill the Thetford cassette with the specified quantity of sanitary liquid.

Then add enough water to completely cover the bottom of the Thetford cas-
sette.

Close the drainage neck with the cap.

Return the drainage neck to its original position.

Fig. 173 Turning drainage neck

Never put the sanitary liquid directly in the toilet bowl.

Fig. 174 Filling with sanitary liquid

When inserting, do not use force. The Thetford cassette can be damaged.

Summary of Contents for Goldie









































































































































































































































Search results

Summary of Contents for Goldie

Reviews:

Related manuals for Goldie

Brands by name

Popular brands

Burstner Goldie, Manual

Search results

Summary of Contents for Goldie

Reviews:

Related manuals for Goldie

Brands by name

Popular brands