Burstner Goldie, Manual

Page: 127 / 232

127
I-Modell - 07/07 - Ausgabe 03/07 - 1512317 - BUE-0056-00EN
Appliances
9
9.4.3 Alde boiler (partially special equipment)
The boiler is integrated in the hot-water heater. Over a period of 30 minutes,
the boiler heats approx. 12 l water to a temperature of approx. 40 °C.
Operating modes The boiler has two operating modes:
Heater and hot water (Fig. 131,4)
Hot water (Fig. 131,2)
Selecting operating mode: Use the sliding switch (Fig. 131,3) to set the operating mode.
The boiler can be operated with the following energy sources:
Gas operation (Fig. 131,5)
230 V electrical operation (Fig. 131,7)
Gas and 230 V electrical operation
Gas operation
Switching on: Open the regulator tap on the gas bottle and the gas isolator tap "Heater/
boiler".
Set sliding switch (Fig. 131,5) to gas operation.
Set sliding switch (Fig. 131,3) to either "Heater and hot water" (Fig. 131,4)
or to "Hot water" (Fig. 131,2).
The red indicator lamp (Fig. 131,6) goes on whenever a fault occurs.
Switching off: Set the sliding switches (Fig. 131,3 and 5) to "0".
Close the gas isolator tap "Heater/boiler" and the regulator tap on the gas
bottle.
230 V electrical operation
Switching on: Set the sliding switch (Fig. 131,7) to the required output level.
Set sliding switch (Fig. 131,3) to either "Heater and hot water" (Fig. 131,4)
or to "Hot water" (Fig. 131,2).
Switching off: Set the sliding switches (Fig. 131,3 and 7) to "0".
Fig. 131 Operating unit for boiler
1 Temperature control knob
2 Operating mode "Hot water"
3 Sliding switch for circulating pump
4 Operating mode "Heater and hot
water"
5 Sliding switch for gas operation
6 Red indicator lamp "Fault"
7 Sliding switch for 230 V electrical
operation