Burstner Goldie, Manual

Page: 120 / 232

120
I-Modell - 07/07 - Ausgabe 03/07 - 1512317 - BUE-0056-00EN
Appliances
9
Switching on manually: Press the button (Fig. 124,7). The heating mode is displayed by the symbol
(Fig. 124,9).
Switching off manually: Press the button (Fig. 124,7). The symbol (Fig. 124,9) goes off.
Switching on the engine
heating:
Press switch (Fig. 124,4) down. Engine is preheated.
Switching off the engine
heating:
Press switch (Fig. 124,4) up. Engine stays cold.
Setting the time: Press the button (Fig. 124,2). The time setting is displayed by the symbol
(Fig. 124,8).
Set the time with the buttons (Fig. 124,3 and 6).
Programming heating start: Press the button (Fig. 124,5).
Set the switching on time within ten seconds, with the buttons (Fig. 124,3
and 6).
Selecting programmed
switching on time:
Keep pressing button (Fig. 124,5) until the selected programme number
(Fig. 124,1) appears in the display.
9.3 Air conditioning unit (special equipment)
9.3.1 Dometic
Operating modes The air conditioning unit has the following operating modes:
Automatic
Ventilation, manual
Cooling, manual
Heating, manual
The thermostat has a temperature range of 18 °C to 40 °C.
Automatic mode In automatic mode the desired temperature merely has to be set.
Fig. 124 Operating unit for independent
vehicle heater
In the winter, vehicle heating can be supported but not replaced by the air
conditioning unit.
Also read the manufacturer's instruction manual.