Burstner Goldie, Manual

Page: 23 / 232

23
I-Modell - 07/07 - Ausgabe 03/07 - 1512317 - BUE-0056-00EN
Before the journey
3
Loading the bike rack with
bicycles
When loading the bike rack, observe the centre of gravity. The centre of gravity
of the bicycles must be as close as possible to the rear wall of the vehicle. The
bike rack should always be loaded from the inside to the outside.
Loading the bike rack correctly:
Fold the bike rack downwards.
Place the heaviest bicycle directly against the rear wall.
Place the lightest bicycles in the centre or on the outside of the bike rack.
Secure the front and rear wheels of each bicycle with the retaining straps
on the bike rack.
In addition, fasten the outermost bicycle to the spacer.
If the bike rack is only loaded with one bicycle, position the bicycle as closely
as possible to the rear wall.
Bike rack, not lowerable
The bike rack (Fig. 2) permits the motorhome to easily transport 2 bicycles.
Expansion for 3 bicycles is possible.
Loading the bicycles: Fold the swivel clip down.
Place the bicycles on top and secure them with quick straps.
Fasten the bike-block spacer to the frame of the outermost bicycle.
When loading the bike rack, observe the centre of gravity. If the bike rack
is only loaded with one bicycle, position the bicycle as closely as possible
to the vehicle wall.
Driving with a folded out bike rack without bicycles is not permitted.
Before every journey, check:
Is the bike rack without bicycles folded in correctly?
Are the bicycles securely fastened to the bike rack using the bike rack
belts?
Also read the manufacturer's instruction manual.
Fig. 2 Bike rack, not lowerable