Burstner Goldie, Manual

Page: 11 / 232

11
I-Modell - 07/07 - Ausgabe 03/07 - 1512317 - BUE-0056-00EN
Safety
2
Before commencing the journey, turn the flat screen and the screen
holder back to the basic position and slide them in until they lock into
place. Close the TV cabinet.
During the journey, the seats are only to be occupied by persons (see
chapter 4). The authorised number of seats is stipulated in the vehicle
documents.
In seats which are fitted with seat belts, you have to observe seat belt
laws.
Fasten your seat belts before the beginning of the journey and keep
them fastened during the journey.
Before commencing the journey, fix swiveling tables.
Always secure children with the children safety equipment prescribed for
the respective height and weight.
Factory-set three-point safety belts must be used when attaching child
restraint systems.
The base vehicle is a commercial vehicle (small truck). Adjust your
driving technique accordingly.
When driving through underpasses, tunnels, etc. observe the overall
height of the vehicle (refer to the technical data in the vehicle docu-
ments).
In winter, the roof must be free of snow and ice before commencing the
journey.
Check tyre pressure before a journey or every 2 weeks. Wrong tyre
pressure causes excessive wear and can lead to damage or even to tyre
burst. You can lose control of the vehicle.
Do not operate the independent vehicle heater at petrol stations. Danger
of explosion!
Do not operate the independent vehicle heater in closed spaces. Danger
of suffocation!
Before commencing the journey, distribute the payload evenly within the
vehicle (see chapter 3).
When loading the vehicle and when taking a rest from driving, in order to
load luggage or food, for example, observe the maximum permissible
gross weight and axle loads (refer to vehicle documents).
Before commencing the journey, ensure that all cupboard doors, the toilet
compartment door and all drawers and flaps are secure. Engage the refrig-
erator door securing device.
Before commencing the journey, close windows and skylights.
Before commencing the journey, close all external flaps and lock them.
Before commencing the journey, remove the external supports and retract
the corner steadies or steady legs which are fitted to the vehicle.
Before commencing the journey, put the antenna in park position.
During the initial journey and each time after changing a wheel, re-tighten
the wheel bolts/wheel nuts after 50 km (30 miles). Subsequently inspect
them at regular intervals in order to ensure that they are firmly seated. See
chapter 13 for tightening torque.