Burstner Goldie, Manual

Page: 180 / 232

180
I-Modell - 07/07 - Ausgabe 03/07 - 1512317 - BUE-0056-00EN
Maintenance
12
12.9.6 Garage light
Halogen bulb 12 V/21 CP
Changing bulbs: Use a suitable tool (e.g. a screwdriver) to carefully lever out the cover
(Fig. 199,2) at the notch (Fig. 199,1) and remove it.
Remove halogen bulb.
Put in a new halogen bulb.
Reassemble the lamp in the reverse order.
12.10 Spare parts
For safety reasons, spare parts for pieces of equipment must correspond with
manufacturer's instructions and be permitted by the manufacturer as a spare
part. These spare parts may only be fitted by the manufacturer or an author-
ised specialist workshop. Our authorised dealers and service centres are
available for any spare parts requirement.
Here are some suggestions of important spare parts:
Fuses
V-belt
Windscreen blades
Bulbs
Water pump (submerged pump)
When ordering spare parts please indicate the chassis number and the vehicle
type to the Bürstner dealer.
Fig. 199 Garage light
Every alteration of the original condition of the vehicle can alter road
behaviour and jeopardize road safety.
The special equipment and original spare parts recommended by
Bürstner have been specially developed and supplied for your vehicle.
These products are available at your Bürstner dealer. The Bürstner
dealer is informed about admissible technical details and carries out the
required work correctly.
The use of accessories, parts and fittings not supplied by Bürstner may
cause damage to the vehicle and jeopardize road safety. Even if an
expert's report, a general type approval or a design certification exists,
there is no guarantee for the proper quality of the product.
No liability can be assumed for damage caused by products which have
not been released by Bürstner. This also applies to impermissible alter-
ations to the vehicle.