PASSLOCK II
9
SATURN
Saturn vehicles (1996-2000) with Factory Keyless
Entry have a unique Anti-Theft System.
Locate the
Factory Alarm Module
located behind
the Right Rear Quarter Panel (trunk area). Connect
the
PINK
and
YELLOW/BLACK
wires of Connector “J
and D” of the
Factory Anti-Theft Module
as shown.
1.
56
Strip back one inch of insulation on the wire you need to connect to.
Separate the vehicle wire(s) as shown. Make the separation large
enough to fit the other wire through.
Insert the wire(s) from the starter through the hole as shown. If
two or more wires are inserted, wrap them in opposite directions.
Wrap the wire around one side then the other and finally around
itself as shown.
Use electrical tape to wrap. Be sure to cover the wire about two
inches on either side of the connection. First pull the wire that you
have just connected along side the wire you connected to, tape
and wire tie them together. Use this method for all connections.
CAUTION: All wires must be wrapped with tape and wire tied.
1.
2.
3.
4.
5.
MAKING WIRING CONNECTIONS
Summary of Contents for DELUXE 200B
Page 1: ......
