3
Transporting the boiler
Logano plus GB312 – 6 720 806 273 (2013/01)
13
3
Transporting the boiler
This section describes how to move the boiler safely and without
damaging it.
3.1
Lifting and handling the boiler
The boiler can be carried to its installation site using 2 pipes (1¼ ",
approx. 80 inches long).
▶ Unscrew the locking screw from the top center of the boiler's front
cover.
▶ Lift font panel slightly and draw forwards to remove.
▶ Unscrew the locking screws from the side panels at the front and
back of the boiler.
▶ Slightly lift the side panels and remove.
Fig. 5
Removing front cover and side panels
[1]
Front panel
[2]
Side panel
[3]
Locking screw
▶ Unscrew the securing screws.
▶ Lift the boiler off the pallet.
Fig. 6
Lifting the boiler off the pallet
[1]
Locking screw
[2]
Pallet
▶ Push the pipes through the holes at the front and rear of the boiler
(
Fig. 7, page 14).
▶ Secure the pipes at the positions shown in Fig. 7 to prevent slipping,
for example, by using adhesive tape.
▶ Carry the boiler to the installation site.
CAUTION:
Risk of system damage from impacts.
The standard boiler includes parts that are sensitive to
impact.
▶ If the boiler has to be moved after delivery, protect all
components against shocks and impacts.
▶ Observe the transport instructions on the packaging.
If the boiler is not to be installed immediately, protect
the connections from entry of dirt.
Dispose of packaging in an environmentally-responsible
manner.
CAUTION:
Risk of injury through carrying heavy loads.
▶ Always lift and move the appliance with the
assistance of another person and use the grip
positions shown.
▶ Secure the boiler against slipping.
7 747 010 720-06.1RS
1
1
2
