background image

Service and

Maintenance Instructions

for use by engineers and heating contractors

5797 342 - 01    08/2017

Read and save these instructions
for future reference

.

Vitoflex 300-RF

Product may not be exactly as shown

If the information in this manual is not 

followed exactly, a fire or explosion 

may result causing property damage, 

personal injury or loss of life.

Improper installation, adjustment and/or 

operation could cause carbon monoxide 

poisoning resulting in injury or loss of life.

This product must be installed and serviced 

by a professional service technician who is 

experienced and qualified in hot water boiler 

installation and wood fuel combustion.

Do not store or use gasoline or other 

flammable fluids in the vicinity of this or 

any other appliance.

WHAT TO DO IF YOU SMELL FLUE GAS

 

Deactivate heating equipment

 

Open windows and doors.

 

Inform your heating contractor

Please file in Service Binder

WARNING

WARNING

IMPORTANT

H

Vitoflex 300-RF 150, 220, 300, 400 and 540

Wood-fired Boiler

Output range: RF 150  154 to   512 MBH   (45 to 150 kW)

 

 

RF 220  205 to   751 MBH   (60 to 220 kW)

 

 

RF 300  273 to 1024 MBH   (80 to 300 kW)

 

 

RF 400  341 to 1365 MBH (100 to 400 kW)

 

 

RF 540  478 to 1843 MBH (140 to 540 kW)

Summary of Contents for Vitoflex 150-RF





































Reviews: