btsr SMART MATRIX TWIST, Operating Manual

Page: 72 / 79

IS3x/TTS Sensor Features
SMART MATRIX TWIST - 3-4 -
Interpretation of the signalling lights located on the sensors
Green Led ON Normal operation in CONTROL mode;
No defects detected by the sensor.
Green LED FLASHING ƒ Normal operation in MONITOR mode
ƒ Sensor under automatic numbering procedure.
ƒ Sensor in Delay Control phase
ƒ Sensor disabled via software
Red LED FLASHING During machine operation the sensor detected a defect.
1 flash
TPX-L error (*)
2 flashes TPX-H error (*)
Green LED ON
Red LED ON Sensor locked. Switch off and on the system. If the condition
persists, replace the sensor.
Green LED OFF
Red LED OFF
ƒ
Sensor not powered ( check connections ).
ƒ Sensor de-activated (“ Touch Light” skimmed ); to re-activated it,
skim again the “Touch Light”.
Green LED FLASHING
Red LED FLASHING Indicates a sensor fault (e.g. Loss of stored data).
Try to reprogram the sensor.
If the fault remains, replace the sensor
(*) For more details, please refer to paragraph “Parameters that affect the sensor detection features”.