btsr SMART MATRIX TWIST, Operating Manual

Page: 38 / 79

Sensor Configuration and Numbering
SMART MATRIX TWIST - 2-12 -
Single Sensor Numbering
To number a single sensor (for instance in case of sensor replacement) operate as follows:
•
Carry out all the operations described for sensor
configuration and numbering until the first sensor
identifier (
A1 ) appears on the screen.
•
Select the coordinates of the sensor to be re-numbered
( See Note 1 ).
•
Skim the touch light of the relevant sensor; The
sensor’s led changes from flashing green to red.
To quit the identification procedure after the sensor re-
numbering.
EXIT to return to configuration menu.
Note 1: To select the coordinates of the sensor you wan to renumber (e.g. A4), operate as follows:
•
Turn the selector to select the desired side or sensor.
Press the selector to alternately switch between side
and sensor selection.
•
Select the sensor A4.