Style Loading
SMART MATRIX TWIST
- 2-32 -
Style Loading
At any time you may load a new style on all the sensors or on a specific range of sensors, pressing the
button.
Press
LOAD
Highlight the
Style
field and turn the selector to choose the
style you want to load (
in this example
TWIST1
), then click
to remove the highlighting.
Select the sensor(
s
) on which you want to load the selected
item.
In the “
from
” space you may choose the range of sensors
whose firmware shall be updated:
POSITION n to m
or
SECTION n to m
pointing and confirming the relevant fields.
In the “
on side
” space you may specify both machine sides
(
ALL
) or only the desired side (
A
or
B
).
Examples:
to update only the sensor No. 3 of side B, set:
from POSITION 3 to 3 on side B.
to update all sensors of section 3, side A and B, set:
from SECTION 3 to 3 on side ALL
.
Once you have selected the sensor(
s
) you want to update,
press
LOAD
.
During the loading process, a
LOADING STYLE…
message will briefly appear
Summary of Contents for SMART MATRIX TWIST
