Technical Characteristics
SMART MATRIX TWIST
- 1-10 -
IS3F-TTS and IS3W-TTS Sensors
Technical Characteristics
IS3W-TTS Sensors
IS3F-TTS Sensors
Power supply voltage
12 .. 24 Vdc ± 20%
12-24 VDC ± 20%
Current absorption
30 mA Max
20 mA Max
STOP Output
NPN open collector
NPN open collector
STOP output logic
Programmable (
NO - NC
),
Continuous or Pulse
Programmable (
NO - NC
),
Continuous or Pulse
STOP output protection
Protection against over-voltages
and short-circuits
Protection against over-voltages and
short-circuits
STOP output max current
200 mA continuous; 500 mA peak 200 mA continuous; 500 mA peak
Activation delay
Programmable from 1 to 250 sec
Programmable from 1 to 250 sec
Signalling
With integrated LED
With integrated LED
Dimensions
36.8x25x15 mm
36.3x25x10 mm
Communication bus
One wire
One wire
Storage temperature range
-25° / +85° C
-25° / +85° C
Temperature range
+10° / +60° C
+10° / +60° C
SM-DIN TWIST
The SM-DIN TWIST Boards represent the interface between IS3.. sensors and SMART MATRIX Terminal.
On each SM-DIN TWIST Board it is necessary to setup 2 essential parameters:
P01
=
Unique Board identification code (
01 – 240
)
P02
=
Communication speed (
Baudrate
)
SM-DIN TWIST Technical Characteristics
Power supply voltage
12-15 VAC / 24 VDC
Current absorption
200 mA Max
Protection fuse (
Board protection
) 5
A
Protection fuse (
Sensor power supply
) 3
A
0,3 A 125 VAC
Stop output (
NO/NC
)
1A 30 VDC
0 – 24 VDC
VIL Max 1,2 VDC
Inputs
VIH Min 5 VDC
Operating temperature range
+10° / +60° C
Storage temperature range
-25° / +85° C
Overall dimensions
138.5x124x35 mm
Summary of Contents for SMART MATRIX TWIST
