background image

Input/Output Configuration on SM-DIN/Smart Matrix 

 

SMART MATRIX TWIST 

- 2-14 -

 

Input/Output Configuration on SM-DIN/Smart Matrix 

 

 

This function allows you to configure the input/output signals of 

all 

the SM-DIN Boards (

BOARDS

 option) as 

normally open (

NO

) or normally closed (

NC

) contacts. The parameters to be configured are distributed on 4 

different windows (

IN

OUT

CV%, PRX

). 

It also allows you to configure the output relay of SMART MATRIX terminal as normally open (

NO

) or 

normally closed (

NC

) contact. 

 

 

Enter the 

SETUP

 menu.

 

 

 

Select 

I/O CONFIG

.

 

 

 

Select 

BOARDS

.

 

 

 

Turn the selector to point in sequence each field of the 
window (

IN

 

 

START

 

 

EXT 3

 

 

EXT 2

 

PRX

). 

The frame indicates the 

“Pointed” 

field. 

Click to select the pointed item. The field name will be 
highlighted (

reverse

 

 

 Example: 

 

START

 field selected (

reverse

Turn the selector to choose the polarity of 

START

 signal 

(

either Normally Open = 

NO

, or Normally Closed = 

NC

), 

then click to confirm. 

Point and select in sequence the 

EXT 3,

 

EXT 2 

and

 PRX 

signals

 

and set the relevant polarity. 

Then point the window header (

IN

) and click to select it. 

 

SETUP 

 

I/O CONFIG 

Summary of Contents for SMART MATRIX TWIST
















































































Reviews: